nanowash™ 10 – SiO₂ cleaning and surface activation
nanowash™ 10 – technical explanation
nanowash™ 10 is a highly concentrated SiO₂-based cleaner that not only removes dirt but also chemically activates the surface.
Unlike traditional detergents, the product does not leave the surface passive, but prepares it for the next treatment.
---
WHAT NANOWASH™ 10 DOES
– removes grease, soot, rust residues and organic dirt
– removes biofilm and ingrained dirt
– chemically activates the surface
– leaves a slight SiO₂ reactivity on the surface
– facilitates subsequent washes
---
WHAT MAKES THIS DIFFERENT
Most detergents clean the surface and leave it passive.
nanowash™ 10 does two things:
1. cleans the surface
2. activates the surface
This means that the surface is not "dead" after washing, but ready for the next step.
---
PRINCIPLE OF OPERATION
nanowash™ 10 doesn't stop at the surface.
Washing continues until rinsing, when dirt is also removed from deeper layers. At the same time, the surface is chemically activated.
nanowash™ 10 also acts as a primer.
After washing, the surface is not passive, but ready for the next treatment. This improves the adhesion of coatings and helps achieve a more even final result.
---
APPLICATIONS
nanowash™ 10 is designed for professional use, where the same product works in several different applications:
– vehicles (passenger cars and commercial vehicles)
– motorhomes and caravans
– heavy equipment
– agricultural equipment (agri)
– boats and marine use
– properties and exterior surfaces
– bathrooms and saunas
---
DILUTION RATIO AND EFFICIENCY
nanowash™ 10 is highly concentrated:
– 1 liter → up to 400 liters of working solution
– usage is based on workload
– does not remain in storage, but is used up in operation
---
INSTRUCTIONS FOR USE
– normal wash: 1 cap / 2 l water
– heavy dirt and aluminum: dilution up to 1:10
– foam cannon: 5 caps / 1 l shampoo
Rinse with plenty of water and dry the surface.
Do not use undiluted.
---
LOGISTICS AND STORAGE
– fewer products in stock
– less volume to transport
– lower logistics costs
– simpler procurement and inventory management
---
WHY THE PRODUCT MOVES IN THE MARKET
nanowash™ 10 is not a single-use product, but directly tied to the workload.
When work is done:
– the product is used, found to be an effective solution
– the product is easy to reorder, as the packaging size works
This makes the product's demand continuous, the product does not remain in stock.
---
WHO IS THE PRODUCT FOR
– car washes and detailers
– boat maintenance
– property maintenance
– professionals who want to reduce the amount of chemicals
---
SUITABILITY
Suitable for most surfaces:
– painted surfaces
– metal
– plastic and composites
– glass
– stone and tile
– fabric, tarpaulins and leather
---
TECHNICAL DATA
– dilution: up to 1:400
– surfactants: in accordance with EC 648/2004
– suitability: for almost all surfaces
– usage: professional and consumer use
---
ENVIRONMENT AND BIODEGRADABILITY
nanowash™ 10 contains surfactants that are biodegradable in accordance with EC Regulation 648/2004.
The product is designed for efficient use with small quantities, which reduces the total chemical load during use.
Biodegradability applies to the product's surfactant components as defined by the regulation.
---
FREQUENTLY ASKED QUESTIONS
Is this just a detergent?
No. The product cleans and chemically activates the surface at the same time. The chemical result is immediately visible on the treated surface.
Does this replace other detergents?
Often yes. One product can replace several different products.
Does this leave a film on the surface?
No. No polymer, no wax, no film. This performs chemical activation.
Can this be used before coating?
Yes. The product is designed as part of the coating process. And this product is completely safe to use even after coating when properly diluted.
---
SUMMARY
nanowash™ 10 combines cleaning and chemical activation in one product.
Less chemicals.
More performance.
Clearer process.
