Only 30 minutes → new car???

This red SEAT was completely cloudy and covered in dust.

The customer believed that brightening the surface required hours, grinding, and expensive treatments.

Just 5 caps of nanowash in a bucket, one hand wash, one coating, and in just 30 minutes the car's surface was like new - without machines, without multi-step work.

Diamondplure's nanowash 10 and nanox siO2 changed everything.

ATV like new – just nanowash with Snow foam???

Our customer sent us pictures of a cabin ATV that had been stored outside for years. Sun, rain, tree sap, and dirt had taken their toll – the surface was faded and looking untidy.

The customer had already considered refinishing or even repainting... It was starting to look like the only option.

The ATV had been washed with everything possible that could be found in stores and online... But honestly, not with the desired result.

I decided to try one more option...

A friend praised Diamondplure's products and I decided to try this foaming shampoo from Pulju. I don't have a pressure washer at the cottage, but I used a water hose and applied the foam to the ATV. Honestly, I didn't have high expectations.

The surprise was great.

Foam on the machine, I scrubbed the surfaces with a wash mitt and rinsed. ??? The ATV looked really good. At first I thought the surface was darker when wet and I dried the surfaces. The surface didn't get any worse when dry either. Unbelievable when you know how many substances I've tried to wash it with.

Solution

  • Thorough rinsing with water → removal of loose dirt
  • Washing with nanowash™ ION solution → 5 caps in a bucket mixed with cheap shampoo + cool water
  • The entire car was washed by hand — including the fabric roof
  • Rinsing and complete drying
  • HYDRONANO coating for finishing → perfect pair with graffex


Problem

The customer wanted to get the car back into his own hands and wanted the original deep black color on the surface.

The challenge was to do it quickly and efficiently — without fuss or hard work, if that was even possible in this case.

Well, look... in this case, it had already occurred to me that the coating had already left the surface. The surface was completely cloudy, the water droplets had dried on it and the dirt had eaten away the shine. Many people would have taken out their machines and started sanding - we did it differently .

1. What had happened to the coating?

“Well, look… the three-year-old nanox siO2 graffex coating was still there, but it was clogged.

The surface looked dead because it had accumulated:

  • Limescale and minerals
  • Water drop residue
  • Fat layers
  • Dirt caused by irregular washing

“When the coating is not maintained, it becomes clogged: the shine disappears, the surface looks dull and dirt sticks more easily. It works for all coatings, this is no exception.


But listen, the coating wasn't dead – it was just dormant."

The solution – a mixture that brought the surface to life:

  • nanowash™ ION : 5 capfuls / 6 L of water = very high concentration of active ingredients
    → ION removed dirt, broke down grease, dissolved minerals and activated the old SiO₂ network.
  • HYDRONANO : 50 ml → APR technology is fused with the old graffex, giving the surface back its depth, shine and water repellency.

“This was a bit like chemical resuscitation:
First the blockages were opened, then new energy was injected, and the surface came to life.”

2. Why the change seems “radical”

"Look carefully at that picture of the surrendered car...

It looks new, but we haven't milled it a single millimeter ."

  • The reflections are much sharper → the SiO₂ film is reactivated.
  • The black color is black again → before the surface was grayish and matte.
  • The surfaces are clean of years of accumulated cloudiness → ION chemically dissolved them.
  • The rims also look new → ION + HYDRONANO leaves them antistatic and dirt no longer sticks.

3. Why was the customer impressed when he received the repaired car back?

“Normally, after three years, a result like this would mean grinding and resurfacing. But this was different.”

Three reasons for the outcome:

  1. The graffex coating was still on the bottom and protected the structure.
  2. nanowash™ ION is not just any ordinary shampoo → it activates the SiO₂ network.
  3. HYDRONANO does not remain on the surface → it fuses with the old coating and complements its structure.