The best products for washing and refinishing bicycles

Select products and buy

It's been tested on race equipment - Now it's ready for your bike.

Always do heavy-duty and basic washes with nanowash™ WASH AND COAT coating detergents. Nanowash SPEED in particular works seamlessly with electric bikes.

nanox siO2 BIKE SPRAY AND COAT type nanocoating is suitable for demanding coating of all bikes, both for racing and demanding hobbies.

Toni shows an example of washing and refinishing a bicycle.

The entire project is completed in a time-saving and efficient manner using Diamondplure products, without any additional, unnecessary work steps - with a professional approach.

nanowash™ SPEED coating WASH AND COAT type nano detergent concentrate is a very high-quality detergent for washing bikes.

You can wash the frame, transmission, brakes and carbon fiber components without any worries. The detergent is specially designed for washing electric bicycles. For regular bicycles, you can use nanowash Snow foam shampoo.

All Diamondplure detergents are WASH AND COAT type coating nano detergents, they guarantee effective washing results, APR priming and a light coating with every wash. Nothing else is worth using.

Once the bike has been thoroughly washed, the surfaces should be rinsed well. But be careful not to apply too much pressure to the delicate components.

When rinsing your bicycle, it's a good idea to keep in mind not to touch the washer nozzle to surfaces or let the water get too high of a pressure onto sensitive components, such as the chainrings or brakes.

You should also pay attention to the washing instructions provided by the factory for electric bikes. If you release water under pressure in the wrong place, it can result in an unintentionally large drop.

After rinsing, the surfaces must be carefully dried.

Always start drying from the "big" surfaces. Dry the bike frame and saddle first, then one component at a time towards the back of the bike, and finally the rims.

This will avoid accidental scratches if you dry the frame only after drying the rims.

Now let's move on to coating, because it will protect the components for a long time and your bike will be nice to keep clean afterwards.

Now you have primed the surfaces well with nanowash detergent, which has opened the surface materials to receive the actual coating.

Again, start with the larger components and work your way to the back. The coating will fuse to the material immediately.

High-quality coating must also be properly maintained.

Wash your bike regularly with nanowash™ SPEED WASH AND COAT detergent and remember to be careful with excessive water pressure.